Adds a PC/SC verification path for Step-Up Milestone 1 so M1 can be
validated against a personalized card without depending on Nucleo /
X-CUBE-ALIRO bring-up. Verdict run on J3R452 04555A4A0B2190 with M1
CAP installed: AUTH1 OK (3.4s), EXCHANGE 0xC9 OK, ENVELOPE 0xC3 OK
with response decrypting under StepUpSKDevice to the spec 0xA0 ack.
- crypto.py: derive_step_up_session_keys (HKDF parity with
AliroCrypto.deriveStepUpSessionKeys)
- transaction.py: expose step_up_sk on TransactionResult
- step_up.py: verify_step_up_m1 -- SELECT 5502 + GCM-encrypted
C9/C3 round-trip, IVs per StepUpApplet (0x00*8 || counter
reader-side; 0x00*7 || 0x01 || counter device-side)
- cli.py: --step-up flag on aliro-bench-test
- tests: stdlib-RFC-5869 cross-check on the new KDF (122/122 green)
- INSTALL.md: fix multi-place PKG AID typo (missing 02 version byte),
document partial-install recovery, document package-static
credential store (aliro-personalize success !=> 5501/5502 installed)
Code review of 750f570 flagged three Important issues:
- Stale 'Output: target/aliro-applet.cap' comment in pom.xml antrun
plugin block.
- applet/INSTALL.md referenced the old single-CAP filename in three
places, breaking the documented gp.jar --load command.
- No safeguard or hint that -Pj3r180 and -Pj3r452 are mutually exclusive.
Updates the comments and the INSTALL.md filenames to point at
aliro-applet-j3r180.cap as the default. Adds mutual-exclusion notes
to both profile blocks.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Three components, all bench-validated to varying depths:
- applet/: CSA Aliro v1.0 Java Card applet for J3R180. AUTH0 + AUTH1
expedited-standard flow end-to-end green via PC/SC bench reader
(aliro-bench-test). Userland AES-256-GCM and HMAC-SHA-256 layered
on top of J3R180's primitives because the card lacks both natively.
P-256 curve params seeded explicitly per J3R180's quirk.
- harness/: Python orchestrator (aliro-trustgen, aliro-personalize,
aliro-bench-test) for trust-bundle generation, card personalization
via PersonalizationApplet, and PC/SC AUTH0+AUTH1 transactions. 126
pytest cases passing.
- reader/STM32CubeExpansion_ALIRO_V1_0_0/: ST X-CUBE-ALIRO V1.0.0
with our NFC10A1 port (NUCLEO-U545RE-Q + X-NUCLEO-NFC10A1, ST25R200
shared with NFC09A1). nfc10-only/ project, NFC10A1 BSP shim,
ALIRO_TRUST_OVERRIDE include into vendor's provisioning.c, and an
ALIRO_APDU_TRACE wrapper around demoTransceiveBlocking. Boots,
detects the J3R180, completes SELECT + AUTH0; AUTH1 currently fails
with RFAL ERR_PROTO (0xB) — under investigation, see
docs/plans/2026-04-20-nucleo-nfc10a1-port.md and bench-notes/.
Excluded: x-cube-aliro.zip vendor archive, harness/.venv, build dirs,
generated aliro_trust.h (contains private reader scalar), all PEMs.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
