# Aliro Credential — Design

**Date:** 2026-04-17
**Status:** Design agreed; ready for implementation planning.

## 1. Goal

Build a Java Card applet that implements the CSA **Aliro v1.0** User Device role over NFC, plus a hardware test fixture capable of exercising it end-to-end. Target deployment is dangerousthings.com's implantable Java Card products (VivoKey Apex family); generic J3R180 cards and jcardsim serve as intermediate validation stages.

## 2. Scope

### In scope (v1)

- **Transport:** NFC only (ISO-DEP / T4AT over NFC-A, per Aliro spec §10).
- **Protocol phases:** Expedited-standard, Expedited-fast, Step-up — the full NFC User Device role.
- **Roles provided by this project:**
  - User Device (Java Card applet).
  - Reader (instrumented test fixture on ST hardware).
  - Credential Issuer (PC-side test CA).
- **Test fixture:** NUCLEO-U545RE-Q + X-NUCLEO-NFC09A1 (ST25R200) running a modified build of ST's X-CUBE-ALIRO reference. (Earlier draft of this doc said NFC10A1 — that was a part-number mistake. NFC10A1 carries ST25R3916, which is *not* supported by X-CUBE-ALIRO V1.0.0; only NFC09A1/ST25R200 and NFC12A1/ST25R500 ship with BSP drivers.)
- **Development progression for the applet:** jcardsim (fast loop) → J3R180 dev card (real hardware) → VivoKey Apex (final target).

### Explicitly out of scope (v1)

- BLE and BLE+UWB transports (spec §11, §12).
- Production-grade reader infrastructure. The reader is a test rig, not a product.
- Runtime reader provisioning. Trust anchors are compiled into reader firmware.
- Access Manager, back-end systems.
- Revocation Document generation as a CI-integrated workflow (generated manually from the test CA when a revocation test case is needed).
- **X.509 certificates of any kind.** v1 uses:
  - `reader_PubK` authentication (spec §6.3) — the applet is provisioned with the raw Reader public key. No Reader certificate, no Reader System Issuer CA.
  - `kid` header in the Access Document's IssuerAuth (spec §7.2.1) — the Reader is provisioned with the raw Credential Issuer public key. No `x5chain`, no Credential Issuer certificate.
  - The `create_self_signed_ca` helper in `harness/issuer/ca.py` is retained for future v2 use but is not exercised in the v1 flow.

## 3. Architecture

Three cleanly separated components:

```
┌─────────────────────┐        NFC-A / T4AT         ┌────────────────────┐
│  PC Harness (Py)    │                             │   Reader           │
│  - Test CA / Issuer │◀── USB-CDC (logs) ──────────│   Nucleo-U545RE-Q  │
│  - Personalizer     │                             │   + NFC09A1        │
│  - Trust-anchor gen │                             │   mod X-CUBE-ALIRO │
│  - Reader log diff  │                             │                    │
│  - E2E pytest       │                             └──────────┬─────────┘
└──────────┬──────────┘                                        │
           │ PC/SC (pyscard)                                   │ 13.56 MHz
           │                                                   │
           ▼                                                   ▼
      ┌─────────────────────────────────────────────────────────────┐
      │  User Device (Java Card applet)                             │
      │  - AliroApplet (AIDs …5501 / …5502)                         │
      │  - PersonalizationApplet (separate AID, locks after COMMIT) │
      │  - jcardsim / J3R180 / Apex                                 │
      └─────────────────────────────────────────────────────────────┘
```

## 4. The Reader (test device)

### Hardware

- **MCU board:** NUCLEO-U545RE-Q (STM32U545RE).
- **NFC board:** X-NUCLEO-NFC09A1 (ST25R200), stacked via Arduino UNO R3 headers.
- Both officially supported by X-CUBE-ALIRO V1.0.0 (`Projects/nucleo-u5/Applications/Aliro/nfc-only/`); no wiring.

> **Hardware caveat:** earlier drafts of this doc paired NUCLEO-U545RE-Q with X-NUCLEO-**NFC10A1** (ST25R3916). That pairing was wrong — X-CUBE-ALIRO V1.0.0 does **not** include an ST25R3916 driver. The supported shields for the nucleo-u5 project are NFC09A1 (ST25R200, `nfc-only/`) and NFC12A1 (ST25R500, `nfc12-only/`).

### Firmware baseline

Start from `STM32CubeExpansion_ALIRO_V1_0_0/Projects/nucleo-u5/Applications/Aliro/nfc-only`. Vendor the whole tree under `reader/vendor/` untouched. Modifications live beside it; a separate unmodified build (`reader/vendor-stock/`) stays flashable so the applet can be smoke-tested against reference firmware when instrumentation is suspect.

### Modifications

1. **Build-time trust anchors.** The PC harness generates `reader/aliro_trust.h` containing:
   - Credential Issuer CA public key (`issuer_ca_pubkey_x/y`, 32 bytes each).
   - Reader key pair (raw ECC P-256 private / public).
   - Optional Reader System Issuer CA public key for reader_Cert validation.

   Upstream hardcoded values in `Projects/Common/Aliro/Src/provisioning.c` are replaced via a `#include` hook. CMake depends on the generated file so regenerating forces a rebuild. `aliro_trust.h` is gitignored; only the generating inputs are version-controlled.

2. **Structured logging.** One tagged line per protocol event, emitted over the ST-LINK virtual COM port at 115200 8N1:

   ```
   [ISO8601] [tag] [hex-payload] [short-note]
   ```

   Hook points (all at layer boundaries, none inside crypto):
   - Raw APDU in/out at T4AT.
   - Phase transitions in `app_aliro.c`: `AUTH0_START`, `AUTH0_SENT`, `AUTH1_SENT`, `PRIVATE_CHANNEL_ESTABLISHED`, `USER_DEVICE_VERIFIED`, `EXCHANGE_IN/OUT`, `STEP_UP_START`, `DEVICE_REQUEST`, `DEVICE_RESPONSE`, `CONTROL_FLOW_SENT`.
   - Plaintext of private_channel payloads, captured just after the stock code's AES-GCM decrypt and just before dispatch. Accepted because this is a test rig; never ship this path to production.

   Implementation: a single `log_event(tag, buf, len, fmt, …)` wrapper funneling to `CDC_Transmit_FS`.

3. **LEDs preserved.** LD1 = grant (green blink), LD2 = deny (red blink), LD3 = transaction active. Eyes-only smoke testing without the PC.

## 5. The Applet (system under test)

### Targets

| Target | Role | JC version | Notes |
|---|---|---|---|
| jcardsim | Development / fast loop | 3.0.5 API | No hardware needed. |
| J3R180 | On-metal validation | 3.0.5 | Contactless dev card. |
| VivoKey Apex | Production | 3.0.5 | Same `.cap` where possible. |

### Structure

One applet class (`AliroApplet`), registered twice per spec §10.2.1:

- `A000000909ACCE5501` — Expedited Phase AID.
- `A000000909ACCE5502` — Step-up Phase AID.

A second, separate applet (`PersonalizationApplet`) under a non-Aliro AID handles provisioning. It accepts `SET_CRED_KEY`, `SET_ISSUER_PUBKEY`, `SET_ACCESS_DOC`, `COMMIT`, and `RESET` commands, rejects all state-modifying commands after `COMMIT`, and re-unlocks only via `RESET` authenticated with a personalization secret.

### State

- **Transient (RAM):** Active phase, per-transaction ephemeral keypair, derived session keys, GCM nonce counters.
- **Persistent (EEPROM/Flash):** Access Credential keypair (ECC P-256), Credential Issuer trust anchors, pre-signed Access Document bytes, up to 16 Kpersistent slots (each: reader_group_identifier 16 B + Kpersistent 32 B + iteration + expiry). Spec §6.2 mandates a minimum of 16 Kpersistent bindings per Access Credential.

### Crypto primitives

All of the following are required by Aliro v1.0 and present on Java Card 3.0.5 platforms of interest:

| Primitive | Spec use | JC API |
|---|---|---|
| ECC P-256 keygen | Ephemeral & long-term keys | `KeyBuilder.TYPE_EC_FP_*` |
| ECDH (raw point out) | §8.3.1.4 shared-key derivation | `KeyAgreement.ALG_EC_SVDP_DH_PLAIN_XY` |
| ECDSA-SHA-256 | §8.3.1.2 signing in AUTH1 | `Signature.ALG_ECDSA_SHA_256` |
| SHA-256 | Digests, HKDF compressor | `MessageDigest.ALG_SHA_256` |
| HMAC-SHA-256 | HKDF primitive | `Signature.ALG_HMAC_SHA_256` |
| HKDF | §8.3.1.5 key derivation | Built from HMAC-SHA-256 (~30 LOC). |
| AES-128-GCM | private_channel confidentiality/integrity | `Cipher.ALG_AES_GCM` (Apex support to confirm; CTR+GMAC fallback planned) |
| TRNG | §8.3.1.1 RNG | `RandomData.ALG_TRNG` |

### CBOR strategy

The applet does **not** sign CBOR. The Access Document arrives at personalization time already signed by the test CA; the applet stores the bytes and reuses the IssuerAuth verbatim.

During step-up, the applet parses just enough of the reader's `DeviceRequest` (CBOR map lookup by NameSpace + ElementIdentifier) to emit the matching `IssuerSignedItem`s and reuses the stored IssuerAuth unchanged. A hand-rolled decoder (~200 LOC, deterministic-encoding subset only, per spec §7.2 / RFC 8949 §4.2.1) avoids pulling a library into the applet.

### Flash budget (estimate)

- Applet code: ~12 KB.
- Persistent state: ~3 KB (keys + 16 Kpersistent slots + ~1.5 KB Access Document).
- Well within J3R180's 180 KB.

## 6. The PC Harness

### Language choices

- **Python 3.11** for everything PC-side (issuer / personalizer / log capture / E2E tests).
- **Java + JUnit** for the jcardsim fast loop (bolting Python onto jcardsim adds cost without value).

### Python libraries

| Purpose | Library |
|---|---|
| ECC P-256, ECDSA-SHA256, ECDH, HKDF, AES-GCM | `cryptography` |
| CBOR with deterministic encoding | `cbor2` |
| COSE_Sign1 for IssuerAuth | `pycose` |
| Direct PC/SC applet I/O | `pyscard` |
| Reader VCP capture | `pyserial` |
| Test CA X.509 | `cryptography.x509` |

### Test CA (`harness/issuer/`)

Deterministic and on-disk. Inputs version-controlled; outputs clearly marked TEST-ONLY. A single `trustgen` command regenerates:

- Credential Issuer CA key pair + root cert.
- Reader System Issuer CA key pair + root cert.
- A test Reader cert.
- A test Access Credential key pair.
- A default Access Document: permissive access rule, no schedule restriction, `TimeVerificationRequired=false`.

Outputs drop into `trustgen/out/`, where both (a) the applet personalizer and (b) the reader trust-anchor header generator consume them.

## 7. Repo layout

```
aliro_project/
├── applet/                  # Java Card source (Gradle + ant-javacard)
│   ├── src/main/java/...    # AliroApplet, PersonalizationApplet, CBOR, HKDF
│   └── src/test/java/...    # JUnit + jcardsim tests
├── reader/
│   ├── vendor/              # STM32CubeExpansion_ALIRO_V1_0_0/ (modified)
│   ├── vendor-stock/        # Unmodified reference copy for diagnosis
│   └── aliro_trust.h        # Generated, gitignored
├── harness/                 # Python 3.11 + uv
│   ├── issuer/              # Test CA & Access Document builder
│   ├── personalize/         # pyscard-based loader for PersonalizationApplet
│   ├── reader_log/          # pyserial capture + tag parser + trace differ
│   ├── trustgen/            # Emits reader/aliro_trust.h from CA + reader keys
│   └── tests/               # End-to-end pytest (hardware required)
├── spec/                    # Aliro 1.0 PDF + extracted AID/OID cheatsheet
└── docs/plans/              # This file.
```

## 8. Test strategy

Two complementary loops.

### Fast loop — jcardsim + JUnit

- Runs on every applet change. Seconds. No hardware.
- Covers protocol correctness, crypto math, state machine transitions, CBOR edge cases, Kpersistent slot eviction, step-up `DeviceRequest` variants.
- Drives the applet through the same APDUs the real reader would send.

### Hardware loop — pytest

- Personalize a card via PC/SC (pyscard) → place at reader antenna → capture reader VCP log → assert expected trace.
- Slow. Catches jcardsim-vs-real-card divergence (GCM availability, transient-object lifetimes, T=CL framing quirks).
- Gatekeeper before every card port (J3R180 → Apex).

### Top-level build targets

- `make applet` — JUnit + jcardsim tests, build `.cap`.
- `make reader` — regenerate trust header, build firmware, flash.
- `make e2e` — expects card on desk and reader enumerated on USB.

## 9. Security & safety notes

- The reader firmware logs private_channel plaintext. **Test-only.** The production branch (if any is ever cut from this code) must `#ifdef` those logs out. Flagged here so a future reader isn't tempted to ship this image.
- Test CA keys live in-repo, clearly marked. They exist to make flashes and resets reproducible; they have no production use.
- Personalization secret for the `PersonalizationApplet` `RESET` command lives in the harness config alongside the test CA — also test-only.

## 10. Open / deferred

- **AES-GCM availability on VivoKey Apex.** Needs verification before J3R180 → Apex port. If absent, the CTR+GMAC fallback path activates; that fallback is listed in §5 crypto primitives but not yet prototyped.
- **Exact `PersonalizationApplet` wire format.** Intentionally deferred; it's a private interface between our harness and our applet, not spec-driven, so the format gets designed during implementation with no external constraints.
- **CI.** No CI in v1; everything runs on the developer workstation. Revisit once the JUnit suite is substantial enough to want on every push.
- **Expedited-fast Kpersistent expiration policy.** Spec leaves this largely to the User Device. Default: LRU eviction at the 16-slot cap, no time-based expiry. Revisit if deployments need one.

## 11. Glossary (for quick reference)

- **User Device** — the thing being tapped (our Java Card applet).
- **Reader** — the thing tapping (our test fixture).
- **Access Credential** — the keypair unique to the User Device.
- **Access Document** — the CBOR/COSE blob signed by the Credential Issuer, carrying the Access Credential public key and any access rules.
- **IssuerAuth** — COSE_Sign1 structure inside the Access Document (spec §7).
- **Kpersistent** — symmetric key shared with a specific Reader group, used for the Expedited-fast cryptogram path.
- **reader_group_identifier** — 16-byte value identifying a set of Readers that share a trust context.