lf.read() sent CMD_LF_SNIFF_RAW_ADC (passive sniff, reader field OFF), so it captured
only a dead field — a real hardware dump came back flat at 0x7e-0x80 (±1 count of ADC
noise) with no tag modulation, which is why LF identify found nothing. Reader-mode reads
must use CMD_LF_ACQ_RAW_ADC (SampleLF -> field ON) to power the tag and capture its load
modulation.
- read() -> CMD_LF_ACQ_RAW_ADC (field on); sniff() -> CMD_LF_SNIFF_RAW_ADC (field off),
no longer delegating to read(). Shared _acquire() packs the real lf_sample_payload_t
(PACKED bitfield samples:30/realtime:1/verbose:1 + cotag byte = 5 bytes) instead of a
bare uint32.
Tests: read() uses ACQ with a 5-byte payload and correct samples field; sniff() uses SNIFF.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
lf.tune sends the 2-byte {mode,divisor} the firmware requires (was 3 -> EINVARG/0V). t55.writebl packs the 10-byte {data,pwd,blockno,flags} struct with a single bit-packed flags byte (was 12). t55.wakeup packs 5 bytes {pwd,flags}. t55.config is maintained client-side (firmware has no GET). LF_SAMPLING_SET_CONFIG uses send_ng_no_response (firmware never replies). Pre-existing, independent of the rebase.
Phase 1 of package refactor. Moves all source modules into pm3py/core/
with file renames (hf_14a→hf_iso14a, hf_15→hf_iso15, hf_mf→hf_mfc)
and client attribute normalization (hf.a14→hf.iso14a, hf.mf→hf.mfc).
pm3py/__init__.py re-exports from core for backward compat.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
