- Hall sensor + LP5562 EN wired-AND circuit design (DRV5032FB/FE,
1M pull-up, open-drain topology) with three interaction modes:
boot-time recovery, tap-to-swap, hold-to-confirm recovery
- NTAG5 config check tool (tools/ntag5_config_check.py) using
uFCoder library for ISO15693 transparent mode via uFR Zero reader.
Supports inventory + addressed mode for multi-tag fields.
- Updated DEVELOPMENT_PLAN with I2C bus management notes for
LP5562 (0x30) + NTAG5Link (0x54) shared bus
- Updated README with wired-AND hardware diagram, hall sensor
interaction section, and updated wiring table
- Updated CLAUDE.md with LP5562 EN wired-AND topology docs
- Updated STATUS.md with hall sensor decisions and hardware inventory
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Integrate LP5562 driver from sibling project (ntag5-samd21-lp562)
with full doc comments restored
- Update main.rs with complete M1 test: I2C init, GPIO EN, RGBW cycle
- Rewrite DEVELOPMENT_PLAN.md from waterfall to milestone-based groups
organized by hardware availability (Groups A-E)
- Rewrite STATUS.md with milestone checklist tracking
- Add LP5562 timing constraints and flash script docs to CLAUDE.md
- Add flash_when_ready.sh for auto-flash dev workflow
- Add brainstorm design doc for plan redesign rationale
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
