M3: 5 autonomous LP5562 engine patterns (breathe, heartbeat, slow_pulse,
rgb_cycle, color_wash) with dual LED mode support (RGBW/Mono3) and
2mA/ch current for EH-realistic power budget.
M4: NTAG5Link I2C slave driver with session register reads, EEPROM
write-verify, and NDEF Type 5 text record output. Config check validates
CONFIG_0, CONFIG_1, EH_CONFIG against expected values and writes result
as NFC-readable text. Verified on hardware: config check passes, NDEF
readable via ISO15693 from phone.
Key findings from hardware testing:
- SRAM passthrough arbiter blocks NFC reads while I2C bus is active
(resolves naturally when MCU enters STANDBY — noted in M7 plan)
- NTAG5 must be in I2C slave mode (not master) for MCU communication
- EH config mask set to 0x00 (skip check during external power testing)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
acb48902be