only using doxygen description as readme

git-svn-id: https://vsmartcard.svn.sourceforge.net/svnroot/vsmartcard@293 96b47cad-a561-4643-ad3b-153ac7d7599c

ccid/README

@@ -1,72 +0,0 @@
-Title            : ccid
-Authors          : Frank Morgner
-Version          : 1.0.0 27 Jul 2009
-License          : See file COPYING
-Tested Platforms : Linux 2.6 (Debian, Ubuntu, Om 2008)
-
-Welcome to ccid.  The purpose of ccid is to forward a PCSC smartcard reader
-as a standard USB CCID reader. If the host system is in USB device mode, ccid
-forwards the local reader via USB to an other device. If in USB host mode,
-ccid virtually plugges in a USB CCID reader to the host system.
-
-ccid is implemented using GadgetFS. Some fragments of the source code is based
-on the GadgetFS example at http://www.linux-usb.org/gadget/ and on the source
-code of the OpenSC tools.
-
-pace-tool has support for Password Authenticated Connection Establishment
-(PACE) using OpenPACE (see http://sourceforge.net/projects/openpace/).
-pace-tool can be used for PIN management or to encrypt APDUs inside a secure
-messaging channel established with PACE. PACE is experimental and disabled by
-default.
-
-
-INSTALLATION
-------------
-
-See file INSTALL.
-
-
-HINTS ON GADGETFS
------------------
-
-To create an USB Gadget in both USB host and USB client mode, you need to load
-the kernel module gadgetfs. A guide focused on Debian based systems to run and
-compile gadgetfs, you can find here:
-http://wiki.openmoko.org/wiki/Building_Gadget_USB_Module
-
-On OpenMoko it is likely, that you need to patch your kernel (see
-http://docs.openmoko.org/trac/ticket/2206). If you also want to switch multiple
-times between gadgetfs and g_ether an other patch is needed (see
-https://docs.openmoko.org/trac/ticket/2240).
-
-If you only use pace-tool for testing your card, you don't need gadgetfs.
-
-
-HINTS ON OPENSC
------------------
-
-If ccid runs into a checking error, because the Le field of the APDU is 0 (as
-set for the General Authenticate APDU during PACE), you need to patch libopensc
-(see http://www.opensc-project.org/opensc/ticket/209)
-
-
-USAGE
------
-
-When testing PACE with either PIN, CAN, MRZ or PUK run pace-tool. Here you can
-enter APDUs which are to be converted according to the secure messaging
-parameter and to be sent to the card. Herefor insert the APDU in hex (upper or
-lower case) with a colon to separate the bytes or without it. So to read the
-current selected file both of these forms would be valid:
-00:b0:02:00:00
-00B0020000
-To pass a secret to pace-tool, the command line parameters or the environment
-variables PIN/CAN/MRZ/PUK/NEWPIN can be used. If none of these options is used,
-pace-tool will show a password prompt.
-
-
-QUESTIONS
----------
-
-For questions, please email me at:
-Frank Morgner <morgner@informatik.hu-berlin.de>