From f302a271f8455bb7918620bd0fe67c2bc9d86a7f Mon Sep 17 00:00:00 2001 From: frankmorgner Date: Fri, 28 Oct 2011 08:32:25 +0000 Subject: [PATCH] added more markup git-svn-id: https://vsmartcard.svn.sourceforge.net/svnroot/vsmartcard@590 96b47cad-a561-4643-ad3b-153ac7d7599c --- ccid/doc/README.rst | 12 ++++++------ npa/doc/README.rst | 14 ++++++++------ pcsc-relay/doc/README.rst | 6 +++--- virtualsmartcard/doc/README.rst | 33 ++++++++++++++++++--------------- 4 files changed, 35 insertions(+), 30 deletions(-) diff --git a/ccid/doc/README.rst b/ccid/doc/README.rst index bcda317..678fa77 100644 --- a/ccid/doc/README.rst +++ b/ccid/doc/README.rst @@ -33,7 +33,7 @@ Installation ============= ccid uses the GNU Build System to compile and install. If you are unfamiliar -with it, please have a look at the file ``INSTALL``. If you have a look around +with it, please have a look at the file :file:`INSTALL`. If you have a look around and can not find it, you are probably working bleeding edge in the repository. Run the following command in the npa directory to get the missing standard auxiliary files:: @@ -44,7 +44,7 @@ ccid as the following dependencies: - Linux Kernel with GadgetFS_ - OpenSC_ -- libnpa +- :ref:`npa` (only if support for PACE is enabled) ----------------- @@ -52,16 +52,16 @@ Hints on GadgetFS ----------------- To create an USB Gadget in both USB host and USB client mode, you need to load -the kernel module ``gadgetfs``. A guide focused on Debian based systems to run +the kernel module :program:`gadgetfs`. A guide focused on Debian based systems to run and compile gadgetfs, you can find `here `_. On OpenMoko it is likely that you need to `patch your kernel `_. If you also want to switch -multiple times between ``gadgetfs`` and ``g_ether``, `another patch is needed +multiple times between :program:`gadgetfs` and :program:`g_ether`, `another patch is needed `_. -If you are using a more recent version of ``dummy_hcd`` and get an error +If you are using a more recent version of :program:`dummy_hcd` and get an error loading the module, you maybe want to check out `this patch `_. @@ -85,7 +85,7 @@ an example of how to get the standard installation of OpenSC_:: make make install -Now ``libopensc.so`` should be located in ``$PREFIX/lib``. Here is how to +Now :file:`libopensc.so` should be located in ``$PREFIX/lib``. Here is how to configure ccid-emulator to use it:: ./configure OPENSC_LIBS="-L$PREFIX/lib -lopensc" diff --git a/npa/doc/README.rst b/npa/doc/README.rst index f1ad926..0739cc0 100644 --- a/npa/doc/README.rst +++ b/npa/doc/README.rst @@ -4,6 +4,8 @@ .. _OpenPACE: http://sourceforge.net/projects/openpace/ +.. _npa: + *** npa *** @@ -34,7 +36,7 @@ Installation ============ npa uses the GNU Build System to compile and install. If you are unfamiliar -with it, please have a look at the file ``INSTALL``. If you have a look around +with it, please have a look at file:`INSTALL`. If you have a look around and can not find it, you are probably working bleeding edge in the repository. Run the following command in the npa directory to get the missing standard auxiliary files:: @@ -65,8 +67,8 @@ an example of how to get the standard installation of OpenSSL with OpenPACE_:: make make install -Building npa with OpenPACE_ is done best using ``pkg-config``. The file -``libcrypto.pc`` should be located in ``$INSTALL/lib/pkgconfig``. Here is how +Building npa with OpenPACE_ is done best using :command:`pkg-config`. The file +:file:`libcrypto.pc` should be located in ``$INSTALL/lib/pkgconfig``. Here is how to configure npa to use it:: ./configure PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig @@ -79,7 +81,7 @@ Hints on OpenSC libnpa links against libopensc, which is discouraged and hindered since OpenSC version >= 0.12. (We really need to get rid of this dependency or integrate better into the OpenSC-framework.) You need the OpenSC components to be -installed (especially ``libopensc.so``). Here is an example of how to get the +installed (especially :file:`libopensc.so`). Here is an example of how to get the standard installation of OpenSC_:: PREFIX=/tmp/install @@ -92,7 +94,7 @@ standard installation of OpenSC_:: make make install -Now ``libopensc.so`` should be located in ``$PREFIX/lib``. Here is how to +Now :file:`libopensc.so` should be located in ``$PREFIX/lib``. Here is how to configure npa to use it:: ./configure OPENSC_LIBS="-L$PREFIX/lib -lopensc" @@ -118,7 +120,7 @@ Linking against libnpa ---------------------- Following the section `Installation`_ above, you have installed OpenSC_, -OpenPACE_ and npa to ``/tmp/install``. To compile a program using libnpa you +OpenPACE_ and npa to :file:`/tmp/install`. To compile a program using libnpa you need to get the header files from OpenSC_ as well. Here is how to compile an external program with these libraries:: diff --git a/pcsc-relay/doc/README.rst b/pcsc-relay/doc/README.rst index 06775bb..ccb9227 100644 --- a/pcsc-relay/doc/README.rst +++ b/pcsc-relay/doc/README.rst @@ -27,7 +27,7 @@ Installation ============ pcsc-relay uses the GNU Build System to compile and install. If you are -unfamiliar with it, please have a look at the file ``INSTALL``. If you have a +unfamiliar with it, please have a look at the file :file:`INSTALL`. If you have a look around and can not find it, you are probably working bleeding edge in the repository. Run the following command in the pcsc-relay directory to get the missing standard auxiliary files:: @@ -56,8 +56,8 @@ installation of the latter:: make make install -Building pcsc-relay with libnfc_ is done best using ``pkg-config``. The file -``libnfc.pc`` should be located in ``$INSTALL/lib/pkgconfig``. Here is how to +Building pcsc-relay with libnfc_ is done best using :command:`pkg-config`. The file +:file:`libnfc.pc` should be located in ``$INSTALL/lib/pkgconfig``. Here is how to configure pcsc-relay to use it:: ./configure PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig diff --git a/virtualsmartcard/doc/README.rst b/virtualsmartcard/doc/README.rst index 4dd3430..a053750 100644 --- a/virtualsmartcard/doc/README.rst +++ b/virtualsmartcard/doc/README.rst @@ -9,6 +9,9 @@ .. _cyberflex-shell: https://github.com/henryk/cyberflex-shell .. _pyscard: http://pyscard.sourceforge.net/ +.. |vpicc| replace:: :abbr:`vpicc (virtual smart card)` +.. |vpcd| replace:: :abbr:`vpcd (virtual smart card reader)` + ****************** Virtual Smart Card @@ -21,18 +24,18 @@ Virtual Smart Card GPL version 3 :Tested Platforms: - Linux (Debian, Ubuntu, OpenMoko) - - Windows (only virtual smart card, not the virtual reader) + - Windows (only |vpicc|, not |vpcd|) Welcome to virtualsmartcard. The purpose of virtualsmartcard is to emulate a smart card and make it accessible through PCSC. Currently the virtual smart card supports almost all commands of ISO-7816 including secure messaging. Besides a plain ISO-7816 smart card it is also possible to emulate a German ePass (only basic access control) and a rudimentary Cryptoflex smart card. The -virtual smart card (vpicc) can be accessed through the virtual smart card -reader (vpcd) which is a driver for ``pcscd`` of PCSC-Lite_. +|vpicc| can be accessed through the |vpcd| which is a driver for +:command:`pcscd` of PCSC-Lite_. By default the vicc communicates with the vpcd through a socket on localhost -port 35963. The file ``utils.py`` was taken from Henryk Plötz's +port 35963. The file :file:`utils.py` was taken from Henryk Plötz's cyberflex-shell_. @@ -41,14 +44,14 @@ Installation ------------ virtualsmartcard uses the GNU Build System to compile and install. If you are -unfamiliar with it, please have a look at the file ``INSTALL``. If you have a +unfamiliar with it, please have a look at the file :file:`INSTALL`. If you have a look around and can not find it, you are probably working bleeding edge in the repository. Run the following command in the virtualsmartcard directory to get the missing standard auxiliary files:: autoreconf -i -Depending on your usage of the vpicc you might or might not need +Depending on your usage of the |vpicc| you might or might not need the following: - Python_ @@ -57,7 +60,7 @@ the following: - PBKDF2_ - PIP_ -The vpcd has the following dependencies: +The |vpcd| has the following dependencies: - PCSC-Lite_ @@ -66,16 +69,16 @@ The vpcd has the following dependencies: Running virtualsmartcard ------------------------ -First you need to make sure that pcscd loads the vpcd. You might need to run -``update-reader.conf`` to update pcscd's configuration file. Then ``pcscd -f --d`` should say something like ``Attempting startup of Virtual PCD`` +First you need to make sure that pcscd loads the |vpcd|. You might need to run +:command:`update-reader.conf` to update pcscd's configuration file. Then +:command:`pcscd -f -d` should say something like ``Attempting startup of +Virtual PCD`` -Now you can run ``vicc`` which connects to the virtual reader. The -command ``vicc --help`` gives an overview about the command line -options. +Now you can run :command:`vicc` which connects to the |vpcd|. The command +:command:`vicc --help` gives an overview about the command line options. -You should now be able to access the vpicc through the system's -PC/SC API via vpcd/pcscd. You can use the opensc-explorer or pcsc_scan to test +You should now be able to access the |vpicc| through the system's +PC/SC API via |vpcd|/pcscd. You can use the opensc-explorer or pcsc_scan to test that.