added documentation about remote reader

2014-06-13 18:23:33 +02:00
parent 7869ff66cc
commit f84a398f91
11 changed files with 139 additions and 0 deletions
--- a/remote-reader/README
+++ b/remote-reader/README
@@ -0,0 +1 @@
+doc/README.txt
--- a/remote-reader/doc/README.txt
+++ b/remote-reader/doc/README.txt
@@ -0,0 +1,114 @@
+.. highlight:: sh
+
+.. |vpcd| replace:: :abbr:`vpcd (virtual smart card reader)`
+
+.. _remote-reader:
+
+################################################################################
+Remote Smart Card Reader
+################################################################################
+
+.. sidebar:: Summary
+
+    Use an Android smartphone with NFC as contact-less smart card reader
+
+    :Author:
+        `Frank Morgner <morgner@informatik.hu-berlin.de>`_
+    :License:
+        GPL version 3
+    :Tested Platform:
+        Android, CyanogenMod
+
+The Remote Smart Card Reader allows a host computer to use the smartphone's NFC
+hardware as contact-less smart card reader. On the host computer, a special
+smart card driver, |vpcd| must be installed. The Remote Smart Card Reader
+establishes a connection to |vpcd| over the network when a contact-less card is
+detected. Since |vpcd| integrates seamlessly into the PC/SC framework of the
+host system, so the contact-less card can be accessed by a typical smart card
+application, for example OpenSC_.
+
+.. tikz:: Remote Smart Card Reader used to access a contact-less card
+    :stringsubst:
+    :libs: arrows, calc, fit, patterns, plotmarks, shapes.geometric, shapes.misc, shapes.symbols, shapes.arrows, shapes.callouts, shapes.multipart, shapes.gates.logic.US, shapes.gates.logic.IEC, er, automata, backgrounds, chains, topaths, trees, petri, mindmap, matrix, calendar, folding, fadings, through, positioning, scopes, decorations.fractals, decorations.shapes, decorations.text, decorations.pathmorphing, decorations.pathreplacing, decorations.footprints, decorations.markings, shadows
+ 
+    \input{%(wd)s/bilder/tikzstyles.tex}
+	\node (pcsc) [klein, aktivbox, inner xsep=.75cm, align=center] {PC/SC\\Framework};
+    \node (sca) [aktivbox, klein, left=.75cm of pcsc, align=center] {Smart Card\\Application};
+    \node (vpcd) [box, at=(pcsc.east), kleiner] {\texttt{vpcd}};
+    \node (phone) [right=1cm of vpcd] {\includegraphics[width=3cm]{%(wd)s/bilder/smartphone.pdf}};
+    \node (app) [at=(phone.center)] {\includegraphics[width=2.8cm, height=4.9cm]{%(wd)s/bilder/remote-reader.png}};
+    \node (card) [right=0cm of phone, rotate=45] {\includegraphics[width=2cm]{%(wd)s/bilder/smartcard.pdf}};
+
+    \begin{pgfonlayer}{background}
+        \node (box) [box, fit=(pcsc) (sca) (vpcd), inner ysep=1.5em] {};
+        \node [at=(box.north west)] {\includegraphics[width=1cm]{%(wd)s/bilder/computer-tango.pdf}};
+        \path[linie]
+        (sca) edge (pcsc)
+        (vpcd) edge (app)
+        ;
+        \draw [rfid] (phone.center) -- (card.center) ;
+    \end{pgfonlayer}
+
+The Remote Smart Card Reader has the following dependencies:
+
+- NFC hardware built into the smartphone
+- Android 3.0 "Honeycomb" (or newer) or CyanogenMod 8 (or newer)
+- permissions for a data connection (communication with |vpcd|) and for using
+  NFC (communication to the card)
+- |vpcd| :ref:`installed on the host computer<vicc_install>`
+
+For remotely accessing a traditional smart card reader on one computer from an
+other computer, the :ref:`vicc` in relay mode can be used:
+
+.. tikz:: Virtual Smart Card used in relay mode to remotely access a card
+    :stringsubst:
+    :libs: arrows, calc, fit, patterns, plotmarks, shapes.geometric, shapes.misc, shapes.symbols, shapes.arrows, shapes.callouts, shapes.multipart, shapes.gates.logic.US, shapes.gates.logic.IEC, er, automata, backgrounds, chains, topaths, trees, petri, mindmap, matrix, calendar, folding, fadings, through, positioning, scopes, decorations.fractals, decorations.shapes, decorations.text, decorations.pathmorphing, decorations.pathreplacing, decorations.footprints, decorations.markings, shadows
+ 
+    \input{%(wd)s/bilder/tikzstyles.tex}
+	\node (pcsc) [klein, aktivbox, inner xsep=.75cm, align=center] {PC/SC\\Framework};
+    \node (sca) [aktivbox, klein, left=.75cm of pcsc, align=center] {Smart Card\\Application};
+    \node (vpcd) [box, at=(pcsc.east), kleiner] {\texttt{vpcd}};
+	\node (pcsc2) [klein, aktivbox, inner xsep=.75cm, align=center, below=2.5cm of vpcd] {PC/SC\\Framework};
+    \node (vicc) [aktivbox, left=1cm of pcsc2, kleiner] {\texttt{vicc -t relay}};
+    \node (reader) [right=1cm of pcsc2] {\includegraphics[width=2cm]{%(wd)s/bilder/my_cardreader.pdf}};
+    \node (card) [at=(reader.east), rotate=45] {\includegraphics[width=2cm]{%(wd)s/bilder/smartcard.pdf}};
+
+    \begin{pgfonlayer}{background}
+        \node (box) [box, fit=(pcsc) (sca) (vpcd), inner ysep=1.5em] {};
+        \node (box2) [box, fit=(vicc) (pcsc2), inner ysep=1.5em] {};
+        \node [at=(box.north west)] {\includegraphics[width=1cm]{%(wd)s/bilder/computer-tango.pdf}};
+        \node [at=(box2.north west)] {\includegraphics[width=1cm]{%(wd)s/bilder/computer-tango.pdf}};
+        \path[linie]
+        (sca) edge (pcsc)
+        (vpcd) edge [out=south, in=north] (vicc)
+        (vicc) edge (pcsc2)
+        (pcsc2) edge (reader)
+        ;
+    \end{pgfonlayer}
+
+
+********************
+Download and Install
+********************
+
+The Remote Smart Card Reader is not (yet) available in
+any App Store. To use it you need to fetch it from source::
+
+    git clone https://github.com/frankmorgner/vsmartcard.git
+
+We use `Android Studio`_ to build and deploy the application. Use
+:menuselection:`File --> Open` to select :file:`vsmartcard/remote-reader`.
+Attach your smartphone and choose :menuselection:`Run --> Run 'app'`.
+
+
+.. include:: questions.txt
+
+
+********************
+Notes and References
+********************
+
+.. target-notes::
+
+.. _OpenSC: https://github.com/OpenSC/OpenSC
+.. _Android Studio: http://developer.android.com/sdk/installing/studio.html
--- a/remote-reader/doc/download.txt
+++ b/remote-reader/doc/download.txt
@@ -0,0 +1,12 @@
+.. highlight:: sh
+
+********
+Download
+********
+
+You can find the latest release of Remote Smart Card Reader on `Sourceforge
+<http://sourceforge.net/projects/vsmartcard/files>`_.
+
+Alternatively, you can clone our git repository::
+
+    git clone https://github.com/frankmorgner/vsmartcard.git
--- a/remote-reader/doc/questions.txt
+++ b/remote-reader/doc/questions.txt
@@ -0,0 +1,6 @@
+********
+Question
+********
+
+Do you have questions, suggestions or contributions? Feedback of any kind is
+more than welcome! Please use our `project trackers <https://github.com/frankmorgner/vsmartcard/issues>`_.