296 lines
11 KiB
Plaintext
296 lines
11 KiB
Plaintext
.. highlight:: sh
|
|
|
|
.. _pcsc-relay:
|
|
|
|
################################################################################
|
|
@PACKAGE_NAME@
|
|
################################################################################
|
|
|
|
.. sidebar:: @PACKAGE_SUMMARY@
|
|
|
|
:License:
|
|
GPL version 3
|
|
:Tested Platforms:
|
|
- Windows
|
|
- Linux (Debian, Ubuntu, OpenMoko)
|
|
|
|
Welcome to @PACKAGE_NAME@. The purpose of @PACKAGE_NAME@ is to relay a smart
|
|
card using an contact-less interface. Currently the following contact-less
|
|
emulators are supported:
|
|
|
|
- `Hardware supported by libnfc`_
|
|
- OpenPICC_
|
|
- :ref:`acardemulator`
|
|
|
|
Command APDUs are received with the contact-less interface and relayed. The
|
|
Response APDUs are then sent back via RFID. The contact-less data will be
|
|
relayed to one of the following:
|
|
|
|
- to a *real* smart card inserted into one of the systems' smart card readers.
|
|
The smart card reader must be accessible with PC/SC. The smart card may be
|
|
contact-based *or* contact-less.
|
|
- to a :ref:`vicc` that directly connects to :command:`pcsc-relay`. The virtual
|
|
smart card's native interface is used and (despite its name) @PACKAGE_NAME@
|
|
does not need to access PC/SC in this case.
|
|
|
|
.. tikz:: Debug, Analyze and Emulate with PC/SC Relay
|
|
:stringsubst:
|
|
:libs: arrows, calc, fit, patterns, plotmarks, shapes.geometric, shapes.misc, shapes.symbols, shapes.arrows, shapes.callouts, shapes.multipart, shapes.gates.logic.US, shapes.gates.logic.IEC, er, automata, backgrounds, chains, topaths, trees, petri, mindmap, matrix, calendar, folding, fadings, through, positioning, scopes, decorations.fractals, decorations.shapes, decorations.text, decorations.pathmorphing, decorations.pathreplacing, decorations.footprints, decorations.markings, shadows
|
|
|
|
\input{$wd/bilder/tikzstyles.tex}
|
|
\node (pcsc-relay) {\texttt{pcsc-relay}};
|
|
|
|
\node [kleiner, right=2cm of pcsc-relay, yshift=.9cm]
|
|
(libnfc) {Libnfc Devices};
|
|
\node [kleiner, right=2cm of pcsc-relay, yshift=.3cm]
|
|
(openpicc) {OpenPICC};
|
|
\node [kleiner, right=2cm of pcsc-relay, yshift=-.3cm]
|
|
(vpcd) {Virtual Smart Card Reader};
|
|
\node [kleiner, right=2cm of pcsc-relay, yshift=-.9cm]
|
|
(acardemulator) {Android Smart Card Emulator};
|
|
|
|
\node [kleiner, left=2cm of pcsc-relay, yshift=.9cm]
|
|
(contactbased) {Contact-based Smart Card};
|
|
\node [kleiner, left=2cm of pcsc-relay, yshift=.3cm]
|
|
(contactless) {Contact-less Smart Card};
|
|
\node [kleiner, left=2cm of pcsc-relay, yshift=-.9cm]
|
|
(remotereader) {Remote Smart Card Reader};
|
|
\node [kleiner, left=2cm of pcsc-relay, yshift=-.3cm]
|
|
(virtual) {Virtual Smart Card};
|
|
|
|
\node [above=.3cm of pcsc-relay, kleiner, xshift=1.2cm]
|
|
(capdu) {Command APDU};
|
|
\node [below=.3cm of pcsc-relay, kleiner, xshift=-1.2cm]
|
|
(rapdu) {Response APDU};
|
|
\draw (rapdu.east) edge [pfeil] +(1,0);
|
|
\draw (capdu.west) edge [pfeil] +(-1,0);
|
|
|
|
\begin{pgfonlayer}{background}
|
|
\path[line width=.5cm,color=hublue!20]
|
|
(pcsc-relay.mid) edge [out=180, in=0] (contactbased.east)
|
|
edge [out=180, in=0] (contactless.east)
|
|
edge [out=180, in=0] (virtual.east)
|
|
edge [out=180, in=0] (remotereader.east)
|
|
edge [out=0, in=180] (libnfc.west)
|
|
edge [out=0, in=180] (openpicc.west)
|
|
edge [out=0, in=180] (vpcd.west)
|
|
edge [out=0, in=180] (acardemulator.west)
|
|
;
|
|
\end{pgfonlayer}
|
|
|
|
|
|
With @PACKAGE_NAME@ you can relay a contact-less or contact based smart card
|
|
over a long distance. Also you can use it in combination with the :ref:`vicc`
|
|
to completely emulate an ISO/IEC 14443 smart card.
|
|
|
|
.. tikz:: Emulate a contact-less German ID card to perform sanity checks
|
|
:stringsubst:
|
|
:libs: arrows, calc, fit, patterns, plotmarks, shapes.geometric, shapes.misc, shapes.symbols, shapes.arrows, shapes.callouts, shapes.multipart, shapes.gates.logic.US, shapes.gates.logic.IEC, er, automata, backgrounds, chains, topaths, trees, petri, mindmap, matrix, calendar, folding, fadings, through, positioning, scopes, decorations.fractals, decorations.shapes, decorations.text, decorations.pathmorphing, decorations.pathreplacing, decorations.footprints, decorations.markings, shadows
|
|
|
|
\input{$wd/bilder/tikzstyles.tex}
|
|
\tikzstyle{bla}=[shape=rectangle split, rectangle split parts=2,
|
|
every text node part/.style={align=center, klein}, text width=7cm,
|
|
every second node part/.style={kleiner}, inner sep=0pt]
|
|
|
|
\tikzstyle{keks}=[to path={-- ++(.1,0) |- (\tikztotarget)}]
|
|
|
|
\node (touchatag)
|
|
{\includegraphics[keepaspectratio, height=2cm,
|
|
width=2cm]{$wd/bilder/touchatag.png}};
|
|
\node (touchatagbeschreibung) [below=0cm of touchatag, kleiner]
|
|
{touchatag};
|
|
|
|
\node (pcsc-relay) [right=of touchatag]
|
|
{\texttt{pcsc-relay}};
|
|
\node (pcsc-relaybeschreibung) [below=0cm of pcsc-relay, kleiner]
|
|
{NFC emulator
|
|
};
|
|
|
|
\node (vicc) [right=of pcsc-relay]
|
|
{\texttt{vicc -t nPA}};
|
|
\node (viccbeschreibung) [below=0cm of vicc, kleiner]
|
|
{nPA emulator};
|
|
|
|
\node (group) [fit=(touchatag) (pcsc-relay) (vicc) (touchatagbeschreibung)
|
|
(pcsc-relaybeschreibung) (viccbeschreibung)] {};
|
|
\node (funktionenchat) [below=0cm of group, bla]
|
|
{
|
|
PACE
|
|
\nodepart{second}
|
|
\begin{itemize}
|
|
\item Display context (eID/eSign)
|
|
\item Display requested permissions
|
|
\end{itemize}
|
|
};
|
|
\node (funktionenpace) [below=.5 of funktionenchat, bla]
|
|
{
|
|
Terminal Authentication
|
|
\nodepart{second}
|
|
\begin{itemize}
|
|
\item Verify authenticy of terminal
|
|
\item Check freshness of cv certificate
|
|
\item With certificate database
|
|
\begin{itemize}
|
|
\item Identification of service provider
|
|
\item Display purpose of transaction
|
|
\end{itemize}
|
|
\end{itemize}
|
|
};
|
|
|
|
\begin{pgfonlayer}{background}
|
|
\node (box) [fit=(touchatag) (pcsc-relay) (vicc) (touchatagbeschreibung)
|
|
(pcsc-relaybeschreibung) (viccbeschreibung) (funktionenchat)
|
|
(funktionenpace), box, inner sep=.5cm] {};
|
|
\node (boxbild) at (box.north west)
|
|
{\includegraphics[keepaspectratio, height=1.5cm,
|
|
width=1.5cm]{$wd/bilder/moko/moko_reader.png}};
|
|
\node [right=0cm of boxbild.east, yshift=.3cm]
|
|
{Openmoko Neo FreeRunner};
|
|
\end{pgfonlayer}
|
|
|
|
\node (a) [left=1.5of box]
|
|
{\includegraphics[keepaspectratio, height=4cm,
|
|
width=4cm]{$wd/bilder/ivak_kiosk-terminal.pdf}};
|
|
\node (e) [below=0cm of a, text width=2.5cm, align=center]
|
|
{(Public) Terminal};
|
|
|
|
|
|
\begin{pgfonlayer}{background}
|
|
\path
|
|
(touchatag) edge [doppelpfeil] (pcsc-relay)
|
|
(pcsc-relay) edge [doppelpfeil] (vicc)
|
|
(vicc.east) edge [keks, pfeil] (funktionenchat.text east)
|
|
(vicc.east) edge [keks, pfeil] (funktionenpace.text east)
|
|
(a) edge [decorate, decoration={expanding waves, angle=20, segment
|
|
length=6}, nichtrundelinie] (touchatag.south west);
|
|
\end{pgfonlayer}
|
|
|
|
|
|
@PACKAGE_NAME@ has the following dependencies:
|
|
|
|
- PC/SC middleware
|
|
|
|
|
|
.. include:: relay-note.txt
|
|
|
|
|
|
.. include:: download.txt
|
|
|
|
|
|
.. include:: autotools.txt
|
|
|
|
|
|
===============
|
|
Hints on libnfc
|
|
===============
|
|
|
|
Here is an example of how to get the standard
|
|
installation of libnfc::
|
|
|
|
PREFIX=/tmp/install
|
|
LIBNFC=libnfc
|
|
git clone https://github.com/nfc-tools/libnfc $LIBNFC
|
|
cd $LIBNFC
|
|
autoreconf -i
|
|
# See `./configure --help` for enabling support of additional hardware
|
|
./configure --prefix=$PREFIX
|
|
make
|
|
make install
|
|
|
|
Building @PACKAGE_NAME@ with libnfc is done best using :command:`pkg-config`. The file
|
|
:file:`libnfc.pc` should be located in ``$INSTALL/lib/pkgconfig``. Here is how to
|
|
configure @PACKAGE_NAME@ to use it::
|
|
|
|
./configure PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig
|
|
|
|
|
|
====================================
|
|
Hints on Android Smart Card Emulator
|
|
====================================
|
|
|
|
The Android Smart Card Emulator is build around the host card emulation mode of
|
|
Android 4.4 and later. This mode activates the app if the terminal issues a
|
|
SELECT command with one of the app's application identifiers. By default, the
|
|
app only registers for the AIDs for which it has a built-in emulator (see
|
|
:file:`ACardEmulator/app/src/main/res/xml/aid_list.xml`).
|
|
|
|
If used together with @PACKAGE_NAME@, you need to change add AIDs to match the
|
|
applications on the relayed card. Otherwise the app will not be activated when
|
|
it should relay command APDUs to @PACKAGE_NAME@.
|
|
|
|
Modify the Smart Card Emulator settings to use ``Remote Virtual Smart Card`` as
|
|
:guilabel:`Smart Card Emulator`. Now start :command:`pcsc-relay` by specifying
|
|
usage of the vpcd emulator::
|
|
|
|
pcsc-relay --emulator vpcd
|
|
|
|
In the app, change the :guilabel:`VICC Hostname` and :guilabel:`VICC Port` to
|
|
match the location where :command:`pcsc-relay` is waiting for an incoming
|
|
connection. When the app receives a SELECT command to one of the configured
|
|
AIDs, it will connect to :command:`pcsc-relay`, which will then relay the
|
|
command for processing.
|
|
|
|
Compiling and installing Android Smart Card Emulator is covered in its
|
|
:ref:`acardemulator_install` section.
|
|
|
|
|
|
=========================
|
|
Hints on PC/SC middleware
|
|
=========================
|
|
|
|
A PC/SC middleware is included by default in most modern operating systems. On
|
|
Unix-like systems (Linux, OS X, Sun OS) it is realized by PCSC-Lite_. To
|
|
compile @PACKAGE_NAME@ you will need to install the PCSC-Lite headers from
|
|
your distribution.
|
|
|
|
Windows also ships with a PC/SC middleware in form of the Winscard module.
|
|
@PACKAGE_NAME@ can be (cross) compiled with MinGW-w64. Also, Microsoft's
|
|
developement environment Visual Studio includes all necessary data for building
|
|
@PACKAGE_NAME@.
|
|
|
|
|
|
*****
|
|
Usage
|
|
*****
|
|
|
|
.. program-output:: pcsc-relay --help
|
|
|
|
Below we explain what option to choose for the emulator which receives a
|
|
command APDU and transmits a response APDU back to the terminal:
|
|
|
|
=================================================== ==============
|
|
Option ``--emulator``
|
|
=================================================== ==============
|
|
Emulation hardware supported via libnfc ``libnfc``
|
|
Emulation with OpenPICC ``openpicc``
|
|
Android Smart Card Emulator ``vpcd``
|
|
Virtual Smart Card ``vpcd``
|
|
=================================================== ==============
|
|
|
|
Below we explain what option to choose for the connector which calculates
|
|
a response APDU from a given command APDU:
|
|
|
|
=================================================== ===============
|
|
Option ``--connector``
|
|
=================================================== ===============
|
|
Contact-based Smart Card in PC/SC Reader ``pcsc``
|
|
Contact-less Smart Card in PC/SC Reader ``pcsc``
|
|
Contact-less Smart Card in Remote Smart Card Reader ``vicc``
|
|
Virtual Smart Card ``vicc``
|
|
=================================================== ===============
|
|
|
|
|
|
.. include:: questions.txt
|
|
|
|
|
|
********************
|
|
Notes and References
|
|
********************
|
|
|
|
.. target-notes::
|
|
|
|
.. _`Hardware supported by libnfc`: http://nfc-tools.org/index.php?title=Devices_compatibility_matrix
|
|
.. _libnfc: https://github.com/nfc-tools/libnfc
|
|
.. _OpenPICC: http://www.openpcd.org/OpenPICC
|
|
.. _PCSC-lite: https://pcsclite.apdu.fr/
|