915b2fe5f2
git-svn-id: https://vsmartcard.svn.sourceforge.net/svnroot/vsmartcard@359 96b47cad-a561-4643-ad3b-153ac7d7599c
73 lines
2.8 KiB
Plaintext
73 lines
2.8 KiB
Plaintext
/** @mainpage
|
|
|
|
Welcome to ccid. The purpose of ccid is to forward a PCSC smartcard reader
|
|
as a standard USB CCID reader. If the host system is in USB device mode, ccid
|
|
forwards the local reader via USB to an other device. If in USB host mode,
|
|
ccid virtually plugges in a USB CCID reader to the host system.
|
|
|
|
ccid is implemented using GadgetFS. Some fragments of the source code is based
|
|
on the GadgetFS example at http://www.linux-usb.org/gadget/ and on the source
|
|
code of the OpenSC tools.
|
|
|
|
pace-tool has support for Password Authenticated Connection Establishment
|
|
(PACE) using OpenPACE (see http://sourceforge.net/projects/openpace/).
|
|
pace-tool can be used for PIN management or to encrypt APDUs inside a secure
|
|
messaging channel established with PACE. PACE is experimental and disabled by
|
|
default.
|
|
|
|
|
|
@section i INSTALLATION
|
|
|
|
See file INSTALL.
|
|
|
|
|
|
@subsection g HINTS ON GADGETFS
|
|
|
|
To create an USB Gadget in both USB host and USB client mode, you need to load
|
|
the kernel module gadgetfs. A guide focused on Debian based systems to run and
|
|
compile gadgetfs, you can find here:
|
|
http://wiki.openmoko.org/wiki/Building_Gadget_USB_Module
|
|
|
|
On OpenMoko it is likely, that you need to patch your kernel (see
|
|
http://docs.openmoko.org/trac/ticket/2206). If you also want to switch multiple
|
|
times between gadgetfs and g_ether an other patch is needed (see
|
|
https://docs.openmoko.org/trac/ticket/2240).
|
|
|
|
If you only use pace-tool for testing your card, you don't need gadgetfs.
|
|
|
|
|
|
@subsection o HINTS ON OPENSC
|
|
|
|
With PACE support enabled OpenSC older than r4244 will yield something like
|
|
this error:
|
|
|
|
[default] apdu.c:341:sc_check_apdu: Invalid Case 4 short APDU:
|
|
cse=04 cla=10 ins=86 p1=00 p2=00 lc=2 le=0
|
|
resp=0x10353c0 resplen=256 data=0x1034a30 datalen=2
|
|
[default] pace.c:1110:EstablishPACEChannel: Could not get encrypted nonce from card (General Authenticate step 1 failed).
|
|
|
|
It requires the following patch:
|
|
http://www.opensc-project.org/opensc/raw-attachment/ticket/209/le0.patch
|
|
|
|
The following patch makes the hex dumped output more readable:
|
|
http://www.opensc-project.org/opensc/raw-attachment/ticket/263/hex_dump_align.patch
|
|
|
|
|
|
@section u USAGE
|
|
|
|
When testing PACE with either PIN, CAN, MRZ or PUK run pace-tool. Here you can
|
|
enter APDUs which are to be converted according to the secure messaging
|
|
parameter and to be sent to the card. Herefor insert the APDU in hex (upper or
|
|
lower case) with a colon to separate the bytes or without it. Example APDUs can
|
|
be found in the file apdus.
|
|
To pass a secret to pace-tool, the command line parameters or the environment
|
|
variables PIN/CAN/MRZ/PUK/NEWPIN can be used. If none of these options is used,
|
|
pace-tool will show a password prompt.
|
|
|
|
|
|
@section q QUESTIONS
|
|
For questions, please use http://sourceforge.net/projects/vsmartcard/support
|
|
|
|
@author Frank Morgner <morgner@informatik.hu-berlin.de>
|
|
*/
|