Updated instructions so you can use this repo and the pi-gen repo to create your images

.gitignore

@@ -0,0 +1,2 @@
+*.img
+*.img.gz

README.md

@@ -1,4 +1,4 @@
-This Pi-gen icreated image is configured to set up a wifi access point, and SSH.
+This Pi-gen created image is configured to set up a wifi access point, SSH and a web terminal.
 
 The default account is username: `dt` password: `proxmark3`
 
@@ -7,8 +7,22 @@ Connect to the `PM3` wifi hot spot with the passphrase `DangerousThings`
 Once logged in you will need to compile the PM3 software at the moment.
 
 ```
-cd proxmark3 && make clean && make -j
+cd proxmark3 && make clean && make
 sudo make install
 ```
 
-To remake the image you will need my fork of the pi-gen repository.  Copy `pm3.config` to `config` and follow the instructions in the `README.md` file
+To remake the image you will need the pi-gen repository. 
+
+```git clone https://github.com/RPI-Distro/pi-gen ```
+
+If you are building for ARM64 then make sure you checkout the ARM64 branch
+
+```git checkout arm64```
+
+Then you will need to copy the contents of the pi-gen subdirectory from this repository into place.
+
+```cp -rp ./pi-gen/* <your path>/pi-gen/```
+
+Finally you can create the image following the instructions in the pi-gen repository.  This will create an output image in `<your path>/pi-gen/work/Proxmark3/export-image` You will be looking for the one ending in `-pm3.img`
+
+

pi-gen/READMEpm3.md

@@ -0,0 +1,14 @@
+This version of Pi-gen is configured to set up a wifio access point, and SSH.
+
+The default account is username: `dt` password: `proxmark3`
+
+Connect to the `PM3` wifi hot spot with the passphrase `DangerousThings`
+
+Once logged in you will need to compile the PM3 software at the moment.
+
+```
+cd proxmark3 && make clean && make -j
+sudo make install
+```
+
+To remake the image you will need to copy `pm3.config` to `config` and follow the instructions in the `README.md` file

pi-gen/config

@@ -0,0 +1,14 @@
+IMG_NAME="Proxmark3"
+USE_QCOW2=0
+RELEASE="bullseye"
+DEPLOY_ZIP=1
+USE_QEMU=0
+LOCALE_DEFAULT="en_US.UTF-8"
+TARGET_HOSTNAME="Proxmark3"
+KEYBOARD_KEYMAP="us"
+TIMEZONE_DEFAULT="America/Los_Angeles"
+FIRST_USER_NAME="dt"
+FIRST_USER_PASS="proxmark3"
+ENABLE_SSH=1
+WPA_COUNTRY="US"
+STAGE_LIST="stage0 stage1 stage2 stageDTPM3"

pi-gen/pm3.config

@@ -0,0 +1,14 @@
+IMG_NAME="Proxmark3"
+USE_QCOW2=0
+RELEASE="bullseye"
+DEPLOY_ZIP=1
+USE_QEMU=0
+LOCALE_DEFAULT="en_US.UTF-8"
+TARGET_HOSTNAME="Proxmark3"
+KEYBOARD_KEYMAP="us"
+TIMEZONE_DEFAULT="America/Los_Angeles"
+FIRST_USER_NAME="dt"
+FIRST_USER_PASS="proxmark3"
+ENABLE_SSH=1
+WPA_COUNTRY="US"
+STAGE_LIST="stage0 stage1 stage2 stageDTPM3"

pi-gen/stageDTPM3/00-install-packages/00-packages-nr

@@ -0,0 +1,13 @@
+git
+ca-certificates
+build-essential
+pkg-config
+libreadline-dev
+gcc-arm-none-eabi
+libnewlib-dev
+libbz2-dev
+libbluetooth-dev
+libpython3-dev
+libssl-dev
+hostapd
+dnsmasq

pi-gen/stageDTPM3/01-proxmark3/00-run-chroot.sh

@@ -0,0 +1,10 @@
+#!/bin/bash -e
+
+su - dt
+git clone https://github.com/RfidResearchGroup/proxmark3 
+cd proxmark3
+echo PLATFORM=PM3GENERIC > Makefile.platform 
+#make clean && make -j
+exit
+#make install
+

pi-gen/stageDTPM3/02-Wireless-AP/00-run-chroot.sh

@@ -0,0 +1,35 @@
+#!/bin/bash -e
+
+cat << EOF >> /etc/dhcpcd.conf
+
+inteface wlan0
+static ip_address=192.168.23.1/24
+
+EOF
+
+mv /etc/dnsmasq.conf /etc/dnsmasq.orig
+
+cat << EOF > /etc/dnsmasq.conf
+interface=wlan0
+  dhcp-range=192.168.23.17,192.168.23.42,255.255.255.0,24h
+EOF
+
+cat << EOF > /etc/hostapd/hostapd.conf
+interface=wlan0
+country_code=US
+hw_mode=g
+channel=7
+wmm_enabled=0
+macaddr_acl=0
+auth_algs=1
+ignore_broadcast_ssid=0
+wpa=2
+wpa_key_mgmt=WPA-PSK
+wpa_pairwise=TKIP
+rsn_pairwise=CCMP
+ssid=PM3
+wpa_passphrase=DangerousThings
+EOF
+
+sed -i 's/#DAEMON_CONF=""/DAEMON_CONF="\/etc\/hostapd\/hostapd.conf"/' /etc/default/hostapd
+

pi-gen/stageDTPM3/03-ttyd/00-run-chroot.sh

@@ -0,0 +1,16 @@
+#!/bin/bash -e
+
+#cd /usr/local/bin
+wget https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.aarch64
+wget https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.armhf
+wget https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.arm
+
+
+cat << EOF > /usr/local/bin/ttyd
+#! /bin/bash
+/usr/local/bin/ttyd.`/usr/bin/uname -m` $@
+EOF
+
+chown root:root /usr/local/bin/ttyd*
+chmod a+x /usr/local/bin/ttyd*
+

pi-gen/stageDTPM3/EXPORT_IMAGE

@@ -0,0 +1,4 @@
+IMG_SUFFIX="-pm3"
+if [ "${USE_QEMU}" = "1" ]; then
+	export IMG_SUFFIX="${IMG_SUFFIX}-qemu"
+fi

pi-gen/stageDTPM3/SKIP_NOOBS

@@ -0,0 +1,2 @@
+NOOBS_NAME="Raspberry Pi OS Lite PM3 (64-bit)"
+NOOBS_DESCRIPTION="A port of Debian with Proxmrk3 but no desktop environment"

pi-gen/stageDTPM3/prerun.sh

@@ -0,0 +1,5 @@
+#!/bin/bash -e
+
+if [ ! -d "${ROOTFS_DIR}" ]; then
+	copy_previous
+fi