pm3py/docs/rawcli-todo.md

rawcli — catalog & memory-hinting roadmap

The MVP is a list of named transponders, each surfaced through the same UX: a command catalog + a datasheet memory map, both offered as autocomplete suggestions in the completion dropdown — never on the bottom bar, never in command output.

The UX contract (applies to every transponder)

• Completion dropdown offers: command names (by letter → READ(), opcodes (by hex/binary value → raw byte inserted, command as the label), and page/block landmarks with datasheet roles.
• Must work in both hex AND binary entry modes, rendering in the active base.
• Function-call args are base-10 (READ(4)); raw bytes are hex, 0b to intermix binary.

FIXED — raw byte-line autocomplete now fires in hex AND binary

Root cause: entry._digit applied each keystroke as buf.document = Document(...), which resets prompt_toolkit's complete_state and never re-fires completion — so the live menu never appeared during raw byte entry. This hit both hex and binary (the earlier "hex works, binary doesn't" was inaccurate; only command-name completion worked, because that path already used insert_text). Fixed by appending the per-keystroke delta via buf.insert_text instead — type_digit only ever appends (optionally after an auto-space) or drops, so the change is always a pure suffix, and insert_text triggers completion exactly like an ordinary keystroke. Verified by driving the real key handler: the menu now populates on every digit in both modes. Regression: TestKeyBindings::test_digit_binding_fires_completion_trigger_for_raw_bytes.

The Ctrl-t / Ctrl-_ toggle correctly flips the breadcrumb 0x <-> 0b and requests a redraw (verified, guarded by test_toggle_updates_breadcrumb_prefix). An end-to-end live-session test (TestRawcliLiveSession) drives the real PromptSession via a pipe input. A human eyeball of the rendered dropdown on a real terminal is the only thing left unautomated.

Priority 1 — MIFARE Classic (do this first)

• Identify: distinguish 1K (SAK 0x08) / 4K (0x18) / Mini (0x09); today only named, no map.
• Memory map (block → role), mirroring the NTAG page map:
  • Block 0 = manufacturer block: UID + BCC + SAK + ATQA + manufacturer data.
  • Sector trailer (block 3,7,…,63 on 1K; last block of each sector on 4K): Key A (0-5), access bits (6-8) + GPB (9), Key B (10-15) — the access bits are the bit-level detail.
  • Other blocks = data block (with sector number).
  • 4K: sectors 0-31 are 4 blocks; sectors 32-39 are 16 blocks each.
• Catalog: READ/WRITE/HALT exist; note that reads/writes need prior AUTH (Key A/B) — the authenticate step is the reader's job before these.
• Autocomplete must work in hex + binary (see the bug above).

After MFC — 15693 vicinity chips: ICODE SLIX ✅, ICODE SLIX2 ✅, NTAG5 (next)

1. 15693 header builder ✅ — iso15_frame() (flags + command + NXP mfg 0x04), shared by all 15693 catalogs. The full request-flags byte is settable: sub-carrier (0x01), data-rate, inventory, protocol-ext (0x08), and the mode-dependent bits 5-6 (Select/Address vs AFI byte + Nb_slots 1/16), plus option. iso15_flags_decode decodes every bit for the byte-0 hint.
2. Per-chip identify ✅ — identify.name_iso15 now splits the whole E0 04 family with a READ_CONFIG (0xC0) probe (addressed + retried), hardware-verified against a real NTAG5 and a real DNA: session register 0xA0 succeeds only on NTAG5 (00 01400000); DNA errors on 0xA0 (01 0F) but its config block 0x00 succeeds; SLIX2 has no READ_CONFIG (falls to the 0xBD signature step); plain SLIX answers neither. So NTAG5 → "NTAG 5", DNA → "ICODE DNA" (was mislabeled SLIX2), SLIX2/SLIX as before. Real UIDs: NTAG5 E0 04 01 58, DNA E0 04 01 18 (the model's NTAG5 prefix …18 was copied from DNA; real NTAG5 is …58).
3. Catalogs — _SLIX, _SLIX2, and _NTAG5 ✅ all done, dispatched by catalog_for, verified live. _NTAG5 = SLIX2 minus STAY_QUIET_PERSISTENT (NTAG5 rejects it) + READ_CONFIG (0xC0) / WRITE_CONFIG (0xC1) / PICK_RANDOM_UID (0xC2) / READ_SRAM (0xD2) / WRITE_SRAM (0xD3). Follow-up: the AES / ISO 29167-10 commands AUTHENTICATE (0x35) / CHALLENGE (0x39) / READBUFFER (0x3A) for Link/Boost (AES-capable) variants — a crypto sub-protocol with its own param format.
4. Autocomplete UX ✅ (hex + binary, command names + opcode-by-value; the byte-line completion bug is fixed).

INVENTORY_READ (0xA0) / FAST_INVENTORY_READ (0xA1) ✅ — in _SLIX (inherited by _SLIX2), full request body via _inv_read_frame: [AFI] | mask_len(bits) | mask value | first_block | count-1, with the inventory flags set by iso15_frame(inventory=…, afi=…). Mask-less (default), mask-based selective anticollision, and AFI filter all supported. 15693 is now datasheet-complete end to end (flags byte + both SLIX/SLIX2 command sets + inventory-read body).

Hardware verify pending: SLIX2 catalog was verified only against unit tests + a live-session drive (no SLIX2 tag on the reader). Confirm on a real SLIX2 when one is available.

Also queued

• T5577 config block (block 0) bitfield decode (modulation, bit-rate, block count, PWD/AOR) — currently just "config block".
• NTAG I2C plus (model exists, identify names it) — catalog + map.

See project_rawcli_mvp in memory for the named-transponder scope.