Proxmark3 Raspberry Pi Zero 2 W

This image is configured to set up a wifio access point, and SSH.
It will expose a web shell on port 8000 and a pm3 shell on port 8050.
The default user credentials are - username: dt password: proxmark3

AP management interface

Management interface: http://10.3.141.1/

IP address: 10.3.141.1
Username: admin
Password: secret
DHCP range: 10.3.141.50 — 10.3.141.254
SSID: raspi-webgui
Password: ChangeMe

web shell

• web shell (u: dt ; p: proxmark3) at http://10.3.141.1:8000/

web pm3 console

• pm3 shell (u: dt ; p: proxmark3) at http://10.3.141.1:8080/

usage

You can burn the image to a sd-card using https://etcher.balena.io/
Insert the sd-card in your RPI Zero 2 w and power it on.
Wait for one minute for the OS to boot and then connect to the Access Point using the following credentials

SSID: raspi-webgui
Password: ChangeMe

build

To build new image you need will have to follow the steps below: (Tested only on Mac Arm64 arch)

1. checkout pi-gen
   git clone https://github.com/RPi-Distro/pi-gen.git pmbuild
2. copy the content of pi-pm3 folder to pmbuild
   cp -rp pi-gen pmbuild/
3. Checkout the arm64 branch of pi-gen
   cd pmbuild; git checkout arm64
4. make sure you have a docker server running (or any of it's alternatives https://spacelift.io/blog/docker-alternatives)
5. start the build in a docker container
   ./docker-build.sh

On a successful build uou should get something like the screenshot blow: