50 lines
1.6 KiB
Markdown
50 lines
1.6 KiB
Markdown
# Proxmark3 Raspberry Pi Zero 2 W
|
|
|
|
This image is configured to set up a wifio access point, and SSH.
|
|
It will expose a web shell on port 8000 and a pm3 shell on port 8050.
|
|
The default user credentials are - username: `dt` password: `proxmark3`
|
|
|
|
## AP management interface
|
|
Management interface: http://10.3.141.1/
|
|
|
|
```
|
|
IP address: 10.3.141.1
|
|
Username: admin
|
|
Password: secret
|
|
DHCP range: 10.3.141.50 — 10.3.141.254
|
|
SSID: raspi-webgui
|
|
Password: ChangeMe
|
|
```
|
|
## web shell
|
|
* web shell (u: dt ; p: proxmark3) at http://10.3.141.1:8000/
|
|
|
|
## web pm3 console
|
|
* pm3 shell (u: dt ; p: proxmark3) at http://10.3.141.1:8080/
|
|
|
|
|
|
## usage
|
|
You can burn the image to a sd-card using https://etcher.balena.io/
|
|
Insert the sd-card in your RPI Zero 2 w and power it on.
|
|
Wait for one minute for the OS to boot and then connect to the Access Point using the following credentials
|
|
```
|
|
SSID: raspi-webgui
|
|
Password: ChangeMe
|
|
```
|
|
|
|
## build
|
|
|
|
To build new image you need will have to follow the steps below:
|
|
(Tested only on Mac Arm64 arch)
|
|
|
|
1. checkout pi-gen
|
|
``` git clone https://github.com/RPi-Distro/pi-gen.git pmbuild ```
|
|
2. copy the content of pi-pm3 folder to pmbuild
|
|
``` cp -rp pi-gen pmbuild/ ```
|
|
3. Checkout the arm64 branch of pi-gen
|
|
``` cd pmbuild; git checkout arm64 ```
|
|
4. make sure you have a docker server running (or any of it's alternatives https://spacelift.io/blog/docker-alternatives)
|
|
5. start the build in a docker container
|
|
``` ./docker-build.sh ```
|
|
|
|
On a successful build uou should get something like the screenshot blow:
|
|
 |